First of all, the bathroom mat, the anti-slip effect is good, but there is a problem: the anti-slip mat itself is not easy to dry, it will grow mildew! If you want to take out the shower every time you take it out, it is very troublesome, so this is convenient. Then, I made a custom bathroom solid wood floor mat, covering the entire shower area, the cushion is 5cm high, anti-slip is every problem, but there is still a problem of mildew! The underside of the floor mat has been kept moist and will soon become moldy.
Then, IKEA's 30cmx30cm floor mat, only used 9 pieces, 90cmx90cm place, placed under the shower area, I think there are so many unpaved areas around it (my shower area is 160cmx120cm big), it should not be born Mildew. The result is wrong again, the following is still mildew, whether it is a carbonized wood floor mat or a plastic floor mat. Finally, the floor mat of the carbonized wood was taken to the balcony and I went to the flower pot.
Then again, the anti-slip floor tiles are the kind of rough surface. The floor area of the shower area is designed with three floor drains side by side. The reason for designing this is not anti-slip at the beginning, but it is only to avoid the other floor drain after the filter screen on the floor drain is blocked by hair. You can also run water), the floor tiles next to each floor drain are tilted to the floor drain, plus the non-slip plastic slippers with drain design, and a handle on the bathroom wall, so the four add up, it really plays a good anti-slip Function, but there is still a problem: the rough surface tiles are not so good!
Too much floor drain is not so good! When I was staying at the hotel, I saw that the shower area of many hotels was designed in such a way: the square shower area, the middle man standing a large square tile is higher, and the floor tiles within 10cm of the four sides are shorter (about 2cm shorter) In this way, four shallow grooves for water walking are formed on the four sides, the floor drain is designed on the shallow groove here, and the middle high brick is also cut into a grid groove with a depth of 0.3 cm by a vertical interval of 5 cm.
In this way, the water will quickly flow into the shallow grooves around, and then slowly flow into the floor drain. The place where people stand will not accumulate water, and at the same time have a grid, which can play a good anti-slip effect. After washing, Because there is nothing covered on the floor tiles in the shower area, it is conducive to evaporation of water vapor, so the tiles are easy to dry, and the end result is: non-slip and easy to care. At present, I am concentrating on whether this kind of program has other drawbacks. If it is really good, I will try it in the next house decoration!
Address: No. 283 Technology sanitary ware Road, Xindai town, Pinghu City, Zhejiang Pro., China
Contact: Jessica Lv
Tel: 86-573-85219605
Fax: 86-573 85219606
Moble: 0086-13515739471
Wechat/WhatsAPP: 0086-13515739471
Email: jessica@mesashower.com
