The types of bathtubs are classified according to the type, and the following 4 types can be summarized.
1. Freestanding bathtub
The advantage of choosing an independent model is that you don't need to put it against a wall, you can put it in with some space, and it is easy to handle when it needs to be overhauled.
Free-standing bathtubs are required for height, so you must check the actual size before buying.
The style is also biased towards a large apartment, and then if its water inlet and outlet are installed, it needs to be fully connected to the waterway to orderly fill the water.
2. Built-in bathtub
Embedded is a way of putting it in the ordinary style in the past.
It is much safer to use than the standalone type. It just needs to be installed against the wall and takes up less space. It is mainly suitable for residents with limited space.
The disadvantage is that it is not easy to overhaul. The material is very important when choosing. Poor material may affect the life and reduce the use time.
When installing, the sides need to be waterproof to avoid leakage, and the details must be done in place, otherwise the vision will not look so elegant.
3. Skirt bathtub
The skirt can be divided into single skirt and double skirt.
Let's talk about the single-skirt bathtub. The three sides of the bathtub are leaning against the wall. This kind of bathtub is a bit European style, but in fact, there are fewer types of installation.
Let’s talk about the double-skirt bathtub. Most families choose this method mainly because its angle is fixed, and it has a massage function, which can make it more comfortable, completely take away the fatigue from the body, and relax yourself better.
The angle of installation must be correct, not just any position can be installed, it depends on where the person enters, which side should be left out.
4. Round bathtub
A round appearance structure that supports two-person baths. The largest diameter can be about 1.8 meters. If the space is not enough, you can also choose less than 1.5.
The circular bathtub is not suitable for installation against the wall. It is to dig a hole in a separate place, and then join the structure according to the embedding method. It is not so convenient to clean at ordinary times, but the appearance is very good.
Bath size
In addition, in addition to the ones mentioned in the figure above, the round type is recommended to be approximately 1.5-1.8m. Considering the large water consumption, the size should be sufficient and reasonable.
Bathtub purchase
1. Appearance
According to the area that can be accurately vacated to choose what type of benchmarking, in addition to reasonable placement, we must also seek professional advice.
2. Material
The best is undoubtedly the artificial stone, which can be called the most expensive.
The choice of material is nothing more than to be strong enough. The thicker the cylinder is, the better. The inner wall should not be rough and will damage the skin. Therefore, choose the smooth and delicate one.
3. Function
The functions are made according to personal requirements, a single operation is simple, the price is cheap, and it is naturally expensive to be diversified.
4. Cylinder bottom
As the inner wall of the bottom, in addition to being smooth, it also has a certain anti-skid requirement, otherwise it will inevitably encounter the problem of repeated bumps.
5. Motor
Strong power and low sound are good motors.
6. Service
Naturally, big brands don't need to consider this point. Both the quality and the follow-up treatment are very good.
7. Security
Simply check whether it contains the "three noes" and the relevant certificates, such as CE, etc.
Bath material
1. Cast iron bathtub
Features: The process of injecting water is basically inaudible, and it is more durable, but the price is expensive, and the cleaning is super worry-free.
2. Wooden bathtub
Features: This kind of wood is hard and environmentally friendly, but it is a bit weak to clean, and there is a chance of cracking after a period of time.
3. Acrylic bathtub
Features: strong heat preservation, low cost, can meet some unique shapes, and the overall finish is good.
4. Steel bathtub
Features: The general shape is not too rich, suitable for a single low-end style. Although the price is cheap, the insulation effect is not good.
