How to install shower screen?
Installation tools ready:
When the shower screen is installed, some tools need to be used and should be ready before installation. Mainly for the preparation of tape, pen, screwdriver, impact drill, hammer, glue guns, these six common tools.
Two 、 shower screen assembly process:
1. Install sealing strip:
Shower screen placed in the wet bathroom, in order to prevent mildew and other circumstances, shower screen in the edge with aluminum bars, first of all need to install seals. The sealing strip has the functions of sealing, mildew proof, mute, etc..
2, connection framework:
When the sealing strip is installed, the glass is embedded in the aluminum strip. The function of the aluminum bar is to protect the glass, and the two is to use the aluminum bar as the frame, and then fix it to the wall through the frame.
3. Use screws:
After the aluminum strip is buckled, the aluminum bar and the glass, the aluminum strip and the aluminum bar need to be fixed by screws to form a frame. Mounting screws is a crucial step in the assembly process. First of all, this is a meticulous work, screws are relatively small, it is difficult to install. Secondly, the screws must be tightened to ensure the connection frame will not fall apart.
4 place the frame in the installation position:
As the bathroom area is small, the shower screen is assembled in a spacious living room. After assembling the frame, move to the bathroom. First of all, as the sliding door glass first moved into the bathroom alone, pay attention to the following can be put on foam protection. Framework will then be assembled into rostone. When placing, pay attention to careful debugging, avoid two times on the wall tile scratches.
Three 、 shower screen fixation method:
1, established the drilling position:
To ensure the installation level of the screen, it is necessary to use a tape measure and pen to determine the location of the installation. Take the tile edge as the reference, measure the distance from the edge line to the edge of the frame, fix a value, and then mark the position of the hole on the tile with the color pen.
2. Drill holes at the mark position:
Connect the impact drill to the power supply, and then place the mounting hole in the marked position. Pay attention to the location of the hole before drilling, there will be no water pipes, tubes and so on.
3. Install colloidal particles:
The installation of drilling holes on the wall can not save the step of installing colloidal particles in the holes. Colloidal particles are better for fastening screws. The hammer will knock in borehole particles.
4, installation screws fixed:
When the mounting hole is loaded with colloidal particles, the frame hole is aligned to the mounting hole, and then the screw is installed with a screwdriver.
The mounting screws are made up of three parts, screws, screws, gaskets, and nuts. The function of the screw shim is to increase the area of the nut so that the small screw can be placed in the larger hole, and the fastener can also be prevented from being damaged due to the rotation and the compression process in the screw. Nut is the role of sealing screws, to prevent moisture stained with rust.
Four, install shower screen glass door, do glue closure:
1, install the wheel sliding door:
Need to use mobile sliding door pulley, glass door has been reserved for the installation of wheel hole. So we need to install two wheels on the top of the sliding door, the wheel with, placed in the corresponding position, and then install the wheels below.
2, the fixed sliding door:
The glass doors are generally first assembled above the wheels, placed into the installation position, then assembled under the wheels, hold the door.
3. Install sealing strip:
The sliding door is installed, a glass frame, need to install the seals, which needless to say, both sealing and silencing.
4, install sliding door handle:
The handle is easy to install, and the handle and the screw are fastened in a fixed position by means of a screwdriver.
After the door is installed, it must not be less debugging link, try to see whether the smooth opening and closing door push is closed, no gap. If there is a gap, you need to take a good method of debugging.
6, glue sealed ending:
So far, the shower screen installation basically completed, and the rest is to use a dry cloth will be clean. Then use glue gun, in the frame and wall and so on, put on transparent glass glue, effective waterproof, mildew proof.
Address: No. 283 Technology sanitary ware Road, Xindai town, Pinghu City, Zhejiang Pro., China
Contact: Jessica Lv
Tel: 86-573-85219605
Fax: 86-573 85219606
Moble: 0086-13515739471
Wechat/WhatsAPP: 0086-13515739471
E-mail: jessica@mesashower.com
Website: www.mesashower.com
