clean
Please use soft dry cloth when cleaning the walls and bottom basin of shower room. If there is slight dirt, please clean it with soft cloth or sponge with neutral detergent. When removing the stubborn dirt, please use alcohol to clean it.
Do not use the following items for cleaning: acid, alkaline solvent, pharmaceutical (such as hydrochloric acid), acetone diluent and other solvents, decontamination powder, etc., otherwise, it will have adverse effects on human body and cause some adverse conditions of the product.
Pulley maintenance
1. Push pull shower door, there are two ways of sliding block and sliding wheel.
2. Problems to be paid attention to in use of pulley and slide block:
The first is to prevent the moving door from falling off due to the collision of the moving door with force;
Second, pay attention to regularly clean the slide rail, pulley and sliding block, and add lubricant (lubricating oil or wax);
Third, adjust the adjusting screw of the sliding block regularly to ensure the effective bearing and good sliding of the sliding block to the movable door.
Daily maintenance
1. Please use clear water for cleaning routine cleaning, and use glass water for cleaning regularly to maintain the smoothness of glass.
If there is dirt, use neutral detergent to wipe it with soft cloth. If there is stubborn dirt, use a small amount of alcohol to remove it. Do not use acid or alkaline solvent.
2. How to use and maintain the pulley of shower room.
A. Avoid slamming the movable door with force to avoid falling off.
B. Pay attention to regularly add lubricant to the slide rail.
C. Adjust the pulley regularly to ensure the effective bearing and smooth sliding of the movable door.
3. Maintenance of toughened glass, aluminum alloy and artificial stone bottom basin.
A. Do not hit or impact the glass surface with hard objects (especially corners).
B. Do not wipe the glass surface with strong acid, strong alkali corrosive solution to avoid damaging the surface luster.
C. Do not wipe the glass surface with a wire to avoid scratches.
D. Prevent direct sunlight and exposure.
Notes edit
1. The embedded hole position of shower room size should be designed before the bathroom is decorated.
2. The best customized shower room with water supply system and tiles installed.
3. The wiring leakage protection switch device should be considered before the installation of bathing room to avoid rework.
4. The style of the bath room depends on the layout of the toilet. The common ones are the corner type and the one line type.
5. The shower room shall be installed in strict accordance with the assembly process.
6. The shower room must be firmly connected with the building structure and shall not shake.
7. The open shower room must be fixed with expansion bolts and non hollow walls. After drainage, the water volume in the bottom basin shall not be more than 500g.
8. The appearance of the shower room after installation shall be clean and bright. The sliding doors and sliding doors shall be parallel or vertical to each other. The left and right sides shall be symmetrical. The sliding doors shall be opened and closed smoothly without gaps and water seepage. The shower room and the bottom basin shall be sealed with silica gel.
