Six Tips For Cleaning Shower Room Glass

On how good the glass quality of the shower room manufacturer is, it seems that it has always been clean and bright from a distance, but a close look will show that there are many dirty places. What is more painful is that no matter how you clean the dirt, it cannot reach the level of cleanness and brightness, which is particularly difficult to remove. So today, the shower room manufacturer will introduce a simple and effective cleaning method for you. You can easily remove the glass stains with the props and tools available at your side.
The first technique is to pour a little shampoo into the basin, stir it evenly, dip some with a rag, and then scrub it to make the glass clean and bright.
Second, before cleaning the glass, first apply chalk, lime water or gypsum powder on the glass, and then directly scrub the glass with a dry rag after it is thoroughly dried. The stain can be removed immediately and the clean state can be restored.
Six tips for cleaning shower room glass - shower room manufacturer
The third tip is that some old dust is usually hidden in the corner of the glass door. When cleaning the shower room, the manufacturer uses 1:1 vinegar and water to mix, then pour it into the watering can, spray it on the glass, and then use the old newspaper to quietly scrub it.
The fourth tip is that black stains occasionally appear on the glass, so we can directly use a rag dipped in some toothpaste to scrub it.
The fifth technique is to use the fresh-keeping film and wet cloth containing detergent to scrub, which can also restore the greasy glass to a clean state. First of all, spray a layer of detergent on all sides of the glass, and then affix a fresh-keeping film to soften the condensed oil stain. Wait for 10 minutes, tear off the film, and then scrub it with a damp cloth.
The sixth tip is to clean the glass stained with oil. Foshan Shower House Factory uses a household cloth dipped in tea to scrub, but the wiping water should not seep into the edge and the reverse side of the glass to avoid damaging the coating on the reverse side. Of course, you can also use a rag or gauze, dip in some kerosene or wax to scrub. Never use wet cloth to scrub directly, which will only make the glass more blurred.