As a new decorator, there will inevitably be some problems that have never been met before, such as drainage, layout and bath selection, especially in the bathroom. It's not easy to buy a simple shower cabin. In addition to the thickness of glass and hardware hinges, the details can't be ignored. So what are the tips for choosing a shower room?
1. Choose a shower enclosure to see the thickness of the glass
When choosing shower room, we should consider the thickness and load-bearing of glass. As the shower room body, the glass should not be too thick, generally 6mm or 8 mm is enough.
2. View hardware hinges and support bars
When choosing the shower enclosure, the hinge and support bar are the hub center. For the sake of safety, if the glass thickness is within 10 mm, it will be safer to stick on the explosion-proof film. There is an additional support bar on the top of the shower frame. The other end of the bar is fixed on the walls on both sides, which is safer.
3. Choose shower enclosure to see the style
There are many styles of shower enclosures, such as sector shower room, square shower room, diamond shower room, etc.
Like the diamond shower room, it is more suitable for the bathroom with small space. It is very convenient to choose this kind of shower room and save space, but it is necessary to clean the slideway frequently to make the movable door pull more smoothly.
4. Pay attention to details when choosing shower enclosure
Pay attention to the details when buying. Hinge, sealing strip, slide rail and handle all need to be tried to push, and pay attention to every detail of the product. The sealing strip at the joint of glass and glass, glass and wall is also important. The high-quality shower room seal should not be broken at the hinge, and the seal between the glass doors should be magnetic, so that the waterproof effect can be better.
5. Choose shower enclosure to see material and certificate
Qualified shower room aluminum, with hardness of at least 12 degrees, thickness of at least 1.2mm, and the upper aluminum shall be more than 1.5mm. The hardness of aluminum can usually be tested by hand pressing aluminum frame. At the same time, the strength of aluminum plate and the overall hardness of shower room need to be tested. Check whether the original toughened glass sheet has 3C certification mark, product quality inspection certificate and patent certificate. 3C certification is the abbreviation of China compulsory product certification.
6. Choose simple shower room to watch pulley and handle
When buying shower room, you can pull it by hand to test whether the pulley is smooth, whether the pulley and aluminum iron movement are tense when subjected to external force, or it is easy to fall off, etc. Secondly, the shower room should choose ring handle, straight handle, diagonal handle and so on.
