1. after opening the shower room packaging, please put the glass upright and placed smoothly on the wall, horizontal or uneven placement, may lead to broken glass, causing property damage or personal injury;
2. When handling, the horizontal handling shower room is easy to break the glass, must be vertical and carried by more than two people at the same time, and pay attention to avoid collision with hard objects;
3. such as cigarette burning flame will destroy spray or glass, please be sure to stay away from fire;
4. please do not stand and rest in the shower, do not put heavy objects in the shower room;
5. When cleaning, do not use acid, alkali, organic solvent chemicals and acid detergent, otherwise it will damage the surface of the product;
6. Use water or neutral detergent to clean the surface of the product. Remove stains that can not be removed with a clean cloth soaked in a small amount of alcohol;
7. Acrylic products begin to soften when they are heated to 100 degrees centigrade. Therefore, it is not necessary to store or use them at high temperatures of 80 degrees or more;
8. Acrylic board static electricity, it is easy to attach dirt, clean acrylic shower tray, only with cotton dipped in a little soapy water, you can easily remove dust and achieve cleaning effect;
9. Avoid strong contact with benzene, paint, detergent and other organic solvents. Accidental contact may cause surface softening, dissolution, etc., which may compromise the quality of the product;
10. It is strictly prohibited to use sharp or hard objects to wipe the surface of the product;
11. The use of decontamination powder is strictly prohibited, cleaning powder will corrode the surface, reduce surface smoothness;
12. When using sealed silicone, do not apply silicone paint on the surface of the acrylic. If you are not careful to smear a little, remember not to rush to wipe, so it is more difficult to remove, should be cured after its gently removed, is strictly prohibited with hard scratch, otherwise it will lead to surface damage. After the installation of the bottom pot, should be completely cured after the use of silica gel (silica gel curing time is 24 hours).
